Paver Installations Berlin

What Type Of Paver Landscaping Project Did You Have In Mind?

• Do you have an existing paver patio or pool deck you'd like to have rebuilt or changed?
• Are you finally ready to design and build that beautiful new outdoor living space?
• Do you like the look of pavers and want to incorporate them into your landscape?
• Do you want to install a permeable paver driveway?
• Do you want to create some walkways or pathways to wind throughout your landscape?

We Strive To Be The Best Paver Installers In Berlin

• Paver patio installations
• Paver walkways and pathways
• Paver pool deck installations
• Paver driveway installations
• Outdoor cooking area construction

Preparing The Area For Your New Brick Or Paver Installation

Preparation is a huge (arguably the most important) part in building a great looking, long lasting paver landscape feature.  If the groundwork isn't completed properly before installing the pavers you're going to be unhappy with the results.  If the base isn't prepared correctly it will eventually start to settle and when it does, the problems will start to become very visible.

The level of preparation can vary depending on the type of paver installation project as well.  For example, There is a more prep work and a thicker base required if we're installing a paver driveway, then a paver walkway.  The driveway must support the weight of vehicles, while a walkway is only supporting foot traffic.

At Scenic Landscaping & Property Maintenance we are an authorized BELGARD® Partner, and we have taken the necessary training to ensure our installations meet their standards.  We also install UNILOCK and Techo-Bloc paver products as well.  We take the time to ensure our paver installations are completed to the manufacturers specifications.  This ensures your new paver hardscaping looks great, lasts a long time, and the pavers can qualify for the manufacturers warranty.

How Do We Prepare Your Ground For Pavers?

Installing paver patios, driveways, and walkways isn't rocket science but there are some very specific steps and processes that separate the good installations from the poor installations.

Step #1.  The first thing we need to do is measure and mark the area where your pavers will be installed. Using a string line and stakes to mark the perimeter of the area, and spray paint or flags to mark the locations of any corners, curves, or other features.

Step #2.  We Excavate and remove existing soil or materials to a depth of 10"-12” based on soil conditions. This provides a strong foundation for the compacted stone base.

Step #3. We Install and compact base materials. 3/4" crushed stone will be installed and compacted in layers to ensure proper compaction. Base materials are sloped away from buildings and foundations for drainage purposes. Next, a 1" base of screeding sand or chip stone is installed directly on top of the compacted base.

Step #4.  We install your new pavers directly on top of the bedding layer. Pavers will be cut to desired layout and around existing obstacles as needed.

Step #5.  We install edge restraints along the outside edges to prevent paver shifting. Pavers are then compacted with a plate tamper to settle the pavers into the bedding laying and create a flat uniform surface. Edge restraint may consist of fiber reinforced concrete or plastic edging depending on the area.

Step #6.  Finally, polymeric sand is swept into the joints to lock the pavers together and create a durable surface. The polymeric sand is then sprayed with water to activate the polymer and ensure a durable joint.

Step #7.  Once patio is complete, topsoil and grass seed is used to backfill edges and repair any damage made to lawn areas during construction.

As you can see, by spending the extra time on site preparation, you're getting a superior installation that will last and look good for many years to come.

How Our Paver Patio Construction Process Works

• We start with our initial consultation and discuss your design ideas and what you'd like to incorporate.
• We determine the surface area of your project. (this is to determine material requirements)
• We take into account any specific challenges your property might pose for our team.
• We consult with you on the specific paver materials you’d like.
• We’ll provide you with an accurate written estimate for the work.

The amount of work required for this type of landscaping project can vary greatly from property to property dependent on many factors. The slope of your property, existing site and soil conditions, drainage, size and scope of the project, the particular materials being used, and your budget will all be considered. We’ll be able to offer you an accurate estimate only after an initial site visit and material consultation.